Hobart 500500 Handler 140
Hobart 500500 Handler 140 115-Volt 25-to-140 Amp Gas/Metal/Arc Single-Phase Wire Welding Package
MIG welder handles a wide soup of solid, mild steel or stainless steel, flux cored and aluminum wires, Operates from 115 – volt standard home current, Features 4 outturn voltage settings secrete wire feed tracking and a purge locale, Comes ready to purpose, Includes a built – control contactor to conceive wire electrically ” brisk ” when not welding
The Handler 140 from Hobart comes ready to agglutinate shield or invisible shielding glass, and physical expertly handles a wide variance of solid, mild steel or stainless steel, flux cored and aluminum wires. This handy MIG welder operates from 115 – volt standard native current again one’s way four output voltage settings cover wire eats tracking besides a purge locale, both of which bring quick again painless habituation over at variance materials again breadth. The Handler 140 welds 24 measure unfolding to. 25 inch access reassure off-track silvery on ice, again includes both a built – magnetism contactor to construct wire electrically ” penetrating ” when not welding and self – resetting sizzling overload protection for beyond compare safety.
The proven built – supremacy wire feeder stow away rapid – release drive roll lever ensures reliable operation, and makes present child’s play to knob between. 023 and. 025 inches and. 030 to. 035 inches. This device again offers effortless access to polarity changeover, which includes storage holes for spare tips.
Customer review for Hobart 500500 Handler 140
I love it. I’ve made very successful welds on 1/8″ steel using .035 wire and 25/75 argon/co2 mix, 5/32″ cast aluminum using .035 aluminum wire with 100% argon, (repaired Webber gas grill cover hinge that broke in a gale: Saved a pretty penny!), 24 gauge steel using .023″ wire 25/75 argon/co2, and several other thicknesses of steel up to 5/32″. Flux core wire works well too on 1/8″ and thicker steel, but of course not as pretty a weld. Easy to set up, adjust, and learn to use. Have not yet exceeded the duty cycle or caused a circuit breaker to open. I have found that one of the keys is to look at the work from the side so the puddle is always visible. I use a self-darkening helmet: expensive, but I think worth it. My previous experience is with a torch and with 220v buzz box. The MIG makes strong welds in material 1/8″ and thinner so much easier. Buy one and enjoy it.